에스비나르샤

FP-700

Introduction

Model FP-700 is a non-intrusive “Smart” sensor designed to detect and monitor combustible gases in air over the range of 0-100% LEL using catalytic bead sensor technology. The plug-in, field replaceable detector is poison-resistant and features over-sized gold-plated connections that help prevent corrosion. The FP-700’s rugged framework includes an electro-polished 316 stainless steel housing with fully encapsulated electronics and dual layer surge protection. This innovative design virtually eliminates sensor failure due to water ingress, corrosion, vibration, and transient spikes. A primary feature of the Model FP-700 is embedded intuitive software that simplifies operator interface by guiding the user through routine calibration, configuration, and fault diagnostic functions using a built-in alpha/numeric display. The Model FP-700 is equipped with standard analog 4-20mA, and Modbus™ RS-485 outputs. Among its unique features is a wireless option that can be used with Detcon’s SmartWireless® product line. Additional integration options include a Remote Alarm Module (RAM), and HART. Detcon’s combustible gas sensor has an infinite shelf life and is supported by a 2-year warranty.

Specifications

Sensor Type : Continuous diffusion/adsorption , Matched-pair catalytic bead detector , Plug-in field replaceable
Sensor Life : 3 to 5 years typical
Measurement Range : 0-100% LEL (lower explosive limit)
Accuracy/Repeatability : ±3% 0-50% LEL; ±5% 50-100% LEL
Response/Clearing Time : T50 <10 seconds; T90 <30 seconds
Zero Drift : <5% per year
Outputs : Linear 4-20 mA DC , RS-485 MODBUS-RTU

Electrical Classification
Explosion proof
CSA and US (NRTL)
Class I, Division 1, Groups B, C, D (Tamb = -40°C to +75°C)
Class I, Zone 1, Group IIB+H2
ATEX
II 2 G Ex d IIB + H2 T4 Gb (Tamb = -40°C to +75°C)
Ingress Protection : NEMA 4X, IP66

Safety Approvals
CCSAUS Performance to ISA 12.13.01-2000 and CSA 22.2 #152
ATEX
CE Marking
SIL2 Certified to IEC 61508

Warranty
Plug-in detector - 2 years
Transmitter - 2 Years

Operating Temperature Range : -40°F to +167°F; -40°C to +75°C
Storage Temperature Range : -40°F to +167°F; -40°C to +75°C
Operating Humidity Range : 0-99% RH non-condensing

TP-700

Introduction

Model TP-700 is a non-intrusive “Smart” sensor designed to detect and monitor H2S in air over the range of 0-100ppm using a proprietary solid state metal oxide semiconductor technology. The plug-in, field replaceable detector features over-sized gold-plated connections that help prevent corrosion. The TP-700’s rugged framework includes an electro-polished 316 stainless steel housing with fully encapsulated electronics and dual layer surge protection. This Innovative design virtually eliminates sensor failure due to water ingress, corrosion, vibration, and transient spikes. A primary feature of the Model TP-700 is embedded intuitive software that simplifies operator interface by guiding the user through routine calibration, configuration, and fault diagnostic functions using a built-in alpha/numeric display. The Model TP-700 is equipped with standard analog 4-20mA, and Modbus™ RS-485 outputs. Among its unique features is a wireless option that can be used with Detcon’s SmartWireless® product line. Additional integration options include a Remote Alarm Module (RAM) and HART. Detcon’s solid state MOS H2S gas sensor has an infinite shelf life and is supported by a 10-year conditional warranty.

Specifications

Sensor Type : Continuous diffusion/adsorption , CHEMFET Solid State Metal Oxide Semiconductor , Plug-in field replaceable
Sensor Life : 5 to 10 years typical
Measurement Range : 0-20 ppm, 0-50 ppm, 0-100 ppm
Accuracy/Repeatability : ±10% of reading or ±2 ppm (greater of )
Response/Clearing Time : T50 <30 seconds; T80 <60 seconds
Outputs : Linear 4-20 mA DC , RS-485 MODBUS-RTU

Electrical Classification
Explosion proof
CSA and US (NRTL)
Class I, Division 1, Groups B, C, D (Tamb = -40°C to +75°C)
Class I, Zone 1, Group IIB+H2
ATEX
II 2 G Ex d IIB + H2 T4 Gb (Tamb = -40°C to +75°C)
Ingress Protection : NEMA 4X, IP66

Safety Approvals
CCSAUS Complies with ISA 92.0.01 Part 1-1998; Performance Requirements for H2S
ATEX
CE Marking
SIL2 Certified to IEC 61508

Warranty
Plug-in detector - 10 year conditional
Transmitter - 2 Years

Operating Temperature Range : -40°F to +167°F; -40°C to +75°C
FM ISA 92.0.01 Certified from : -40°C to +65°C for H2S
Storage Temperature Range : -31°F to +131°F; -35°C to +55°C
Operating Humidity Range : 5-100% RH non-condensing
Operating Pressure Range : Atmospheric ±10%

IR-700-CH

Introduction

Model IR-700-CH is a non-intrusive “Smart” sensor designed to detect and monitor combustible hydrocarbon gases in air over the range of 0-100% LEL using miniature non-dispersive Infrared Optical (NDIR) sensor technology. As compared to catalytic bead sensors, with NDIR there is no risk of sensor poisoning, no risk of high concentration saturation, and no need for O2 to be present. The plug-in, field replaceable detector features over-sized gold-plated connections that help prevent corrosion. The IR-700-CH’s rugged framework includes an electro-polished 316 stainless steel housing with fully encapsulated electronics and dual layer surge protection. This innovative design virtually eliminates sensor failure due to water ingress, corrosion, vibration, and transient spikes. A primary feature of the Model IR-700-CH is embedded intuitive software that simplifies operator interface by guiding the user through routine calibration, configuration, and fault diagnostic functions using a built-in alpha/numeric display. The Model IR-700-CH is equipped with standard analog 4-20mA, and Modbus™ RS-485 outputs. Among its unique features is a wireless option that can be used with Detcon’s SmartWireless® product line.

Additional integration options include a Remote Alarm Module (RAM) and HART. Detcon’s combustible gas sensor has an infinite shelf life and is supported by a 5-year warranty.

Specifications

Sensor Type : Continuous diffusion/adsorption , Non-dispersive Infrared Optical (NDIR) - Combustible Gas , Sub-miniature plug-in field replaceable
Sensor Life : 5 years typical
Measurement Range : 0-100% LEL (lower explosive limit) , 0-100% by volume
Accuracy : ±2% F.S. (0-50% LEL)
Repeatability : ±2% F.S.
Response Time* : T50 < 6 seconds, T90 < 10 seconds
Zero Drift (typical) : ≤2% per 2 years
Outputs : Linear 4-20 mA DC , RS-485 MODBUS-RTU

Electrical Classification
Explosion proof
CSA and US (NRTL)
Class I, Division 1, Groups B, C, D (Tamb = -40°C to +75°C)
Class I, Zone 1, Group IIB+H2
ATEX
II 2 G Ex d IIB + H2 T4 Gb (Tamb = -40°C to +75°C)
Ingress Protection : NEMA 4X, IP66

Safety Approvals
CCSAUS Performance to ISA 12.13.01-2000 and CSA 22.2 #152
ATEX
CE Marking
SIL2 Certified to IEC 61508

Warranty
Plug-in detector - 5 year pro-rated
Transmitter - 2 Years

Operating Temperature Range : -40°F to +167°F; -40°C to +75°C
Storage Temperature Range : -40°F to +167°F; -40°C to +75°C
Operating Humidity Range : 0-100% RH non-condensing

DM-700 Series

Introduction

Product Available

Specifications

Sensor Type : Continuous diffusion/adsorption , 3-electrode electrochemical cell , Plug-in field replaceable Intelligent Type
Sensor Life : 3 to 5 years typical
Measurement Range : Various
Accuracy/Repeatability : ±2% FS
Response/Clearing Time : Various
Span Drift : <2% signal loss per month
Outputs : Linear 4-20 mA DC , RS-485 MODBUS-RTU

Electrical Classification
Explosion proof
CSA and US (NRTL)
Class I, Division 1, Groups B, C, D (Tamb = -40°C to +50°C)
Class I, Zone 1, Group IIC
ATEX
II 2 G Ex d ib IIC T4 Gb (Tamb = -40°C to +50°C)
Ingress Protection : NEMA 4X, IP66

Safety Approvals
CCSAUS Complies with ISA 92.0.01 Part 1-1998; Performance Requirements for H2S
ATEX
CE Marking
SIL2 Certified to IEC 61508

Operating Temperature Range : Various

Storage Temperature Range : Various
Operating Humidity Range : Various
Operating Pressure Range : Various

PI-700-VOC

Introduction

Detcon Model Series 700 industrial gas detectors are a new generation of intelligent sensor modules that incorporate and integrate several leading edge improvements. The sensors are specifically designed for harsh and extreme locations. This new and superior level of environmental durability in sensor design includes an electropolished 316 stainless steel housing, multi-layered transient spike protection circuitry and 100% encapsulated electronics. The sensor electronics are completely protected and immune to water ingress and corrosion. The sensor elements are all plug-in components and can easily be replaced in the field. Operator interface is non-intrusive via a small handheld magnet. Configuration and routine calibration is intuitive and menu driven with fully scripted instructions. Sensor status is displayed on a built-in alphanumeric LED display. Model Series 700 intelligent sensor modules feature dual redundant outputs, a linear 4-20 milliamp analog signal and a Modbus RS-485 serial output.

Specifications

Sensor Type : Continuous diffusion/adsorption , Photo Ionization Detector (PID) , Plug-in replaceable intelligent type (with replacement lamp)
Sensor Life : 2 years typical
Measurement Range : Gas Dependent, ranges as low as 0-10 ppm or as high as 0-5,000ppm (consult Detcon) , Special Low Range 0-500 ppb
Accuracy/Repeatability : ±10% of reading or ±2% of range (greater of )
Response Time T50 <30 seconds; T90 <60 seconds
Outputs : Linear 4-20 mA DC , RS-485 MODBUS-RTU

Electrical Classification
Explosion proof
CSA and US (NRTL)
Class I, Division 1, Groups B, C, D (Tamb = -20°C to +50°C)
Class I, Zone 1, Group IIB+H2
ATEX
II 2 G Ex d ib IIC T4 Gb (Tamb = -20°C to +50°C)
Ingress Protection : NEMA 4X, IP66

Safety Approvals
CCSAUS Performance to ISA 12.13.01-2000 and CSA 22.2 #152
ATEX
CE Marking

Warranty
Plug-in detector - 1 year
Transmitter - 2 Years

Operating Temperature Range : -4°F to +122°F; -20°C to +50°C
Storage Temperature Range : -4°F to +122°F; -20°C to +50°C
Operating Humidity Range : 0-100% RH non-condensing

GAS & FLAME products

Teledyne Detcon Inc.

FP-700

Introduction

Specifications

TP-700

Introduction

Specifications

IR-700-CH

Introduction

Specifications

DM-700 Series

Introduction

Specifications

PI-700-VOC

Introduction

Specifications